Here's some Jagwire 4mm Slick-lube gear housing, suitable for SRAM and Shimano setups. In the centre is a long lasting slick lubricant that reduces shifting friction and reduces water penetration. Encompassing that are strands of wire which reduce the chance of the housing kinking and messing up your shifting. All of this makes for a low friction and long lasting gear housing!

We sell this in 2m and 10m lengths. 2m will do a long cable for all non-tandem bikes (except extra extra extra long bikes). 10m is slightly cheaper per metre, but you also get much better usage of cable (less wastage, so even cheaper again).

And to top it off, we include some ferrules for your cable. If you need some more ferrules, have a look here.

Offcuts:

The 50 metre rolls we purchase aren't quite 50 metres after all... Instead of binning the small bit at the end, we offer it for you to purchase. We don't stock these lengths as standard, it's only if a bit is cut off. A 1-1.5m offcut will be somewhere between 1m and 1.5m long, the same is true for other lengths of offcuts. Please don't email us asking when we will have offcuts in stock next 😅

Other notes:

• Gear housing comes in 4mm and 5mm diameters. You can use either as long as you use the right ferrules! This cable is 4mm in diameter since it is most common
• Your housing may need a few days to relax after being opened, it may have been stored in a circle for a while...

Here's some Jagwire 4mm Slick-lube gear housing, suitable for SRAM and Shimano setups. In the centre is a long lasting slick lubricant that reduces shifting friction and reduces water penetration. Encompassing that are strands of wire which reduce the chance of the housing kinking and messing up your shifting. All of this makes for a low friction and long lasting gear housing!

We sell this in 2m and 10m lengths. 2m will do a long cable for all non-tandem bikes (except extra extra extra long bikes). 10m is slightly cheaper per metre, but you also get much better usage of cable (less wastage, so even cheaper again).

And to top it off, we include some ferrules for your cable. If you need some more ferrules, have a look here.

Offcuts:

The 50 metre rolls we purchase aren't quite 50 metres after all... Instead of binning the small bit at the end, we offer it for you to purchase. We don't stock these lengths as standard, it's only if a bit is cut off. A 1-1.5m offcut will be somewhere between 1m and 1.5m long, the same is true for other lengths of offcuts. Please don't email us asking when we will have offcuts in stock next 😅

Other notes:

• Gear housing comes in 4mm and 5mm diameters. You can use either as long as you use the right ferrules! This cable is 4mm in diameter since it is most common
• Your housing may need a few days to relax after being opened, it may have been stored in a circle for a while...